The measure your hand for gloves calculator determine two primary measurements: the circumference of the palm and the length of the middle finger.
If your palm circumference measures 8 inches (20.3 cm) and your middle finger length is 3.5 inches (8.9 cm), the calculator would likely recommend a size 8 (Medium) glove.
Glove Size Calculator
| Hand Measurement | Calculation | Result | Recommended Size |
|---|---|---|---|
| Palm: 7.0″, Finger: 3.25″ | 7.0 + (3.25 × 0.5) = 8.625 | 8.63 | Large |
| Palm: 6.5″, Finger: 3.0″ | 6.5 + (3.0 × 0.5) = 8.0 | 8.0 | Medium |
| Palm: 8.0″, Finger: 4.0″ | 8.0 + (4 × 0.5) = 10 | 10 | XXL |
| Palm: 7.25″, Finger: 3.5″ | 7.25 + (3.5 × 0.5) = 9 | 9.0 | XL |
| Palm: 6.75″, Finger: 3.25″ | 6.75 + (3.25 × 0.5) = 8.375 | 8.38 | Large |
| Palm: 7.5″, Finger: 3.75″ | 7.5 + (3.75 × 0.5) = 9.375 | 9.38 | XL |
| Palm: 8.5″, Finger: 4.25″ | 8.5 + (4.25 × 0.5) = 10.125 | 10.13 | XXL |
| Palm: 6″, Finger: 2.75″ | 6 + (2.75 × 0.5) = 7.375 | 7.38 | Small |
| Palm: 9″, Finger: 4″ | 9 + (4 × 0.5) = 11 | 11 | XXXL |
| Palm: 7″, Finger: 3″ | 7 + (3 × 0.5) = 8.5 | 8.5 | Medium |
Glove Size Chart
| Size Label | Palm Circumference (inches) | Palm Circumference (cm) | Middle Finger Length (inches) | Typical Size Category |
|---|---|---|---|---|
| XXS | 6.0 – 6.5 | 15.2 – 16.5 | 2.75 – 3.0 | Extra Extra Small |
| XS | 6.5 – 7.0 | 16.5 – 17.8 | 3.0 – 3.25 | Extra Small |
| S | 7.0 – 7.5 | 17.8 – 19.1 | 3.25 – 3.5 | Small |
| M | 7.5 – 8.0 | 19.1 – 20.3 | 3.5 – 3.75 | Medium |
| L | 8.0 – 8.5 | 20.3 – 21.6 | 3.75 – 4.0 | Large |
| XL | 8.5 – 9.0 | 21.6 – 22.9 | 4.0 – 4.25 | Extra Large |
| XXL | 9.0 – 9.5 | 22.9 – 24.1 | 4.25 – 4.5 | Extra Extra Large |
Glove Size Calculation Formula
Glove Size = (Palm Circumference in inches) + (Middle Finger Length × 0.5)Let’s say your measurements are:
- Palm Circumference: 7.5 inches
- Middle Finger Length: 3.5 inches
Glove Size = 7.5 + (3.5 × 0.5)
Glove Size = 7.5 + 1.75
Glove Size = 9.25This would correspond to an XL size in most standard glove sizing systems.
How to Measure Your Hand for Gloves?
Follow these steps:
- Measuring Palm Circumference:
- Wrap a flexible measuring tape around your dominant hand at the widest part.
- Position the tape just below the knuckles, excluding the thumb.
- Keep your hand flat and fingers together.
- Record the measurement to the nearest quarter inch.
- Measuring Middle Finger Length:
- Start from the base of your middle finger.
- Measure to the tip of your finger.
- Keep your finger straight but natural.
- Record the measurement to the nearest quarter inch.
If measuring for a baseball glove:
- Palm Circumference: 8 inches
- Middle Finger Length: 3.75 inches
This would typically indicate a Large (L) size glove.
How Big of a Glove Should I Get?
- Intended Use:
- Medical gloves should fit snugly.
- Sports gloves may need extra room for movement.
- Work gloves might require space for liners.
- Comfort Factors:
- Allow for natural finger spread.
- Consider joint flexibility.
- Account for hand swelling during use.
For someone working in a laboratory:
- Measured Size: Medium
- Recommendation: Try both Medium and Large sizes.
- Choose Medium if you need maximum dexterity.
- Select Large if wearing for extended periods.
References:
- International Organization for Standardization (ISO) – Protective Gloves Standards https://www.iso.org/standard/64161.html
- Occupational Safety and Health Administration (OSHA) – Hand Protection Standards https://www.osha.gov/personal-protective-equipment
Related Everyday life Tools:
